Pool Resurfacing Service in Orange County
Rough plaster, stains that won't brush off, aggregate showing through? We strip it back and resurface -- plaster, pebble-quartz, or fiberglass -- and hand the pool back like new.
Serving Orange County, CA · Plaster / pebble-quartz / fiberglass · Upfront per-project pricing
Resurfacing options, honestly compared
| Finish | Typical OC range | Lifespan |
|---|---|---|
| Plaster (white marcite) replaster | $5,000–$8,000 | 7–10 years |
| Pebble / quartz aggregate | $7,000–$12,000 | 15–20+ years |
| Fiberglass | quoted per project | 20+ years |
| Epoxy paint (budget refresh) | $3,000–$5,500 | 3–5 years |
Full resurfacing is a $5,000–$12,000 project in Orange County depending on finish and pool size (pebble $5,000–$10,000+ and epoxy $3,000–$5,500 per our 2026 cost data). Fiberglass quotes per project based on size and surface condition. Your on-site quote is the final price.
How a resurface runs
- Drain and chip: the pool is drained and the old surface is chipped and prepped -- the prep is what the new finish bonds to, and it's where cheap jobs cut corners.
- Bond coat: the adhesion layer goes on the prepped shell. Skipped on too many low bids; we never skip it.
- New finish: plaster troweled smooth, pebble/quartz applied and acid-washed to expose the aggregate, or fiberglass laid in coats with cure time between them.
- Fill and startup: the pool is filled and the startup chemistry is balanced over the first days -- the first month of water chemistry decides how the finish cures. We hand you the startup schedule in writing.
- Tile and coping, if bundled: waterline tile and coping are quoted as add-ons -- cheapest to do while the pool is drained and the crew is mobilized.
Resurface or repair? The honest answer
- Resurface when the surface itself is failing: rough plaster, staining that won't brush off, aggregate or gunite showing through, chronic pH bounce from leaching plaster.
- Repair instead when the surface is sound: isolated chips get patched, stained-but-smooth plaster gets an acid wash, and tired waterline tile gets replaced without touching the interior -- see our tile cleaning service.
- The test: if more than a quarter of the surface shows failure signs, patching is throwing money at a resurface you'll buy anyway. We'll tell you which side of that line your pool is on -- and we'd rather sell you the $800 tile job than the $8,000 resurface you don't need.
Frequently asked questions
How much does it cost to resurface a pool in Orange County?
Full pool resurfacing typically runs $5,000-$12,000 in Orange County depending on the finish: plaster (white marcite) replasters sit at the lower end, pebble and quartz aggregate finishes in the middle to upper end ($5,000-$10,000+ per our 2026 cost data), and premium finishes with new tile and coping quote at the top. Epoxy paint is the budget refresh at $3,000-$5,500. Fiberglass quotes per project based on size and condition. You approve the exact price before any draining starts.
What are the pool resurfacing finish options?
Three main options: plaster (white marcite) -- the classic, smoothest, and most affordable full resurface; pebble and quartz aggregate -- small stones or quartz mixed into the plaster for a textured, longer-lasting finish in natural colors; and fiberglass -- a slick, low-maintenance shell applied over the existing surface. Epoxy paint is a fourth option: cheaper and faster, but a cosmetic refresh rather than a true resurface, with a shorter lifespan.
How long does pool resurfacing take?
A standard replaster takes 5-7 working days once draining starts: drain, chip and prep, bond coat, new plaster, then the fill and startup chemistry. Pebble and quartz finishes add a day or two for the aggregate application and acid wash. Fiberglass runs longer because of cure times between coats. Weather and pool condition move the schedule -- old plaster that needs extensive chip-out adds days.
How do I know my pool needs resurfacing?
The signs: rough plaster that scrapes feet, visible staining that won't brush off, exposed gunite or aggregate showing through, frequent pH bouncing (old plaster leaches), and leaks at the plaster-shell bond. If the surface is just stained but smooth, an acid wash or tile cleaning may buy you years -- resurfacing is for when the surface itself is failing.
Does resurfacing include new tile and coping?
Not automatically -- tile and coping are usually quoted as add-ons. Most resurfaces include the interior finish only; waterline tile replacement and coping (the cap around the pool edge) are separate line items. If your tile is dated or the coping is cracked, bundle them: the crew is already mobilized and the pool is already drained, which is the cheapest time to do all three.
Rough plaster? Let's talk resurface.
Upfront per-project pricing -- plaster, pebble-quartz, or fiberglass, quoted before any draining.
Get a free, no-pressure quote
Tell us about your pool and we'll recommend weekly or biweekly honestly.